LAMY LES CONSTRUCTEURSThis apron consists of a flat bolt and a 3-point hook, it can be fitted to all machines (Telescopic and Loaders) and allows the take-up of any equipment with an attachment 3 points. The 3-point hook is adjustable in width to fit the dimensions of different agricultural equipment. It has a storage piton for the ball joints of the 3-point hitch and is equipped with a device suitable for maneuvering the trailers.INSTALLATION : FlatLinkOPTIONALS : -Towing system for all trailers equipped with a ring, with piton, To facilitate the operation of the trailer. (Removable option, replacing the original piton). (Option 1)-K80 trailer towing system for…
Farmhelper ApronFree quote+
LAMY LES CONSTRUCTEURSThis apron is an interface between two telescopes of different brands. It makes it possible to take back the self-propelled tools of a brand with a telescopic of another brand.
Interchangeable ApronFree quote+
LAMY LES CONSTRUCTEURSOPTIONS : Extension forks / Different lengths of forksWidth from 1200mm to 2000mmRotation with triple row of ball bearings, per double acting cylinder (± 400mm), rotation ± 24 °Capacity : 2,5t to 4,5t
Frame leveling ApronFree quote+
LAMY LES CONSTRUCTEURSThis apron allows the operator to modify the position of its equipment by means of a double acting cylinder of 100mm on the left and 100mm on the right.Available from 1.20 m to 2.00 m.
Lateral Displacement ApronFree quote+
LAMY LES CONSTRUCTEURSEquipped with two baffles which prevent the evacuation of the materials on the side.Equipped with a rubber blade that allows a complete scraping of the ground.OPTION: Extension of 1m, possibility of adding them
LAMY LES CONSTRUCTEURSThis straw bale handler made of thick tube ensures perfect stability of the boot. Available in 2; 3 or 4 fingers of diameter 45mm or 70mm for a length of 800mm, the working width is between 0.70m and 2.00m.
LAMY LES CONSTRUCTEURSStructure of the fork built with tube of 160x80x6 pierced with 7 sockets and a plate of 70x10 in the back.The tubes of support of attachment are in 80x80x8, the underside is protected by a blade in 150x20x148. This equipment can take up to five boots of rectangular straws. This product is equipped with a jaw of width 1.70m as standard. The total opening of the jaw varies between 2.20m and 3.70m depending on the model.
Forks forkFree quote+
LAMY LES CONSTRUCTEURSStraw fork without jaw without predisposition grapple hook; For the recovery of several balesHeight: From 1.10m to 2.60mWidth: 2.00m
Straw fork "without jaw"Free quote+
LAMY LES CONSTRUCTEURSThis equipment was created for the handling of Big Bag. It can support up to 2T. It is available in single or double spurs, in different lengths. Welded stop option.
Big Bear ApronFree quote+
LAMY LES CONSTRUCTEURSWidth available from 1.70m to 2.80m. Available in several grapples.MRK: Electroforged fingers 35mm lg 680mm, mounted with anti-pivoting ring (x7) Opening of the adjustable jaw.GRL.S.1E: grapple teeth Flat welded thickness 20mm with 2 blanks connecting the teeth to each other.GRL.S.2E.2P: Grapple in 2 parts flat teeth welded thickness 20mm with 2 blanks connecting the teeth to each other (allowing the passage of connecting rod for kinematic loaders in Z) .
Hydraulic multifunction forkFree quote+
LAMY LES CONSTRUCTEURSWidth available from 0,90m to 1,60m, from 100kg to 350kg the equipment without hooking.Exist in several grapples and in mono and double-cylinderGC :Grapple with 3 or 4 welded teethGC.K: Jaw with 3 or 4 curved fingers Ø35 lg.400
Compact Hydraulic Multifunction forkFree quote+
LAMY LES CONSTRUCTEURSHigh-tip bucket 2 Cylinders (BHD.TP.2V)The High-tip bucket 2 Cylinders is a solution to compensate for a lack of height at loading.Available from 2,30m to 3,00m with capacities ranging from 2500L to 5300L depending on the model, Possibility to have four different capacities per length.Structure high resistanceInternal and external reinforcements.Raised over the full width.It is studied for an intensive use.OPTION : Reversible bolted counter-blade / BHD.TP.2VFOR LOADERS FROM 120 TO 250 HP
High-tip bucket 2 CylindersFree quote+
LAMY LES CONSTRUCTEURSThe High-tip bucket 1 cylinder is a solution to compensate for a lack of height to the loading.Available from 1,80m to 2,50m with capacities ranging from 800L to 2500L.Structure high resistanceInternal and external reinforcements.Raised over the full with.OPTIONS : Counter-blade bolted 250x30 / Counter-blade reversible bolted
High-tip bucket 1 cylinderFree quote+
LAMY LES CONSTRUCTEURSThis high-strength 10 mm thick steel body has a very high resistance and fits on chargers up to 120 hp. It is ideal for the recovery of all types of materials, the 150x20 blade is pre-drilled, with reinforced corners and sides.Available from 1.50 m and 2.45 m with a capacity of 500 L to 1000 LOptions : Bolt counter-blade / Bolt or weld teeth
Grab Bucket A SeriesFree quote+
LAMY LES CONSTRUCTEURSTipper with steel bottom 8 mm thick, rigidifying ply across the width. The upper part is reinforced by a double sheet thickness. It is ideal for taking up all types of materials. The 150x20 blade is pre-drilled, for teeth or counterblades, with reinforced corners and flanks.Width between 1.10m and 2.50m with 300L to 1800L, for each width possibility of having different capacity.Example: A BRT 1,10m is available in 330L 500L and 600LA BRT 2,45m is available in 1000L 1500L and 1700LOPTIONS: Tooth-holder welded with teethCouncer reversible
Dump truckFree quote+
LAMY LES CONSTRUCTEURSTipper available from 1,70m to 2,60m, it has a flat bottom with a central inner reinforcement for intensive work. Grapples available:GRL.S: Welded flat teeth cut welded ep. 20mm GRL.S 1E: Welded flat teeth cut ep. 20mm with 1 blank connecting the teeth to one another GRL.S2E: Welded flat teeth cut welded ep. 20mm with 2 blanks connecting the teeth between them. Possibility of teeth flush or overflowing. GRL.S.2E.2P: The same with the two-part grab (for passage of the central rod on the loaders) MRK: Electroforged finger jaw 35mm lg.680mm, mounted with anti-pivoting rings (x7) MRK.D: Jaw of disilage, the same as a variant 12 fingers for…
Skid Steer LoaderFree quote+
LAMY LES CONSTRUCTEURSThis Palox vacuum adapts to all types of Palox thanks to these adjustments in width and depth.Pressure regulator to be adjusted according to Palox.Reversion from the front and complete dump.Control frame actuated by 2 cylinders closing in front of the Palox and Clamping with ertalon rollers. High resistance structure.
Empty Palox to Reverse FrontalFree quote+
LAMY LES CONSTRUCTEURSCapacity from 2,5t to 6t.Working width adjustable thanks to the mounting in sliding connection of the forks on galvanized axle diameter 60mm.Supports on frame structure and on hooking.OPTIONS : Extension of Forks / Differentes lengths of Forks.
Fork carriageFree quote+
LAMY LES CONSTRUCTEURSThis apron has been designed to allow the operator to unhitch and attach more quickly its accessories. Once mounted on the front of the loader, the operator must just actuate the hydraulic locking cylinder from his cabin to go to work. It is in great demand and appreciated in the industrial field, rubbish dumps etc ... APRONS TIDA: Intermediate Apron Double Sticking. For self-propelled pick-up tool, different clutches.
Clamping Device Quick Locking Hydraulic / Manual-TIDAFree quote+
LAMY LES CONSTRUCTEURSThis deck consists of an AIP hook (FlatLink) and a 3-point hook, it can be adapted to all machines (Telescopic and Loaders) and allows the take back of any equipment with a hook 3 points. The 3-point hook is adjustable in width to fit the dimensions of different agricultural equipment. It has a storage piton for the ball joints of the 3-point hitch and is equipped with a device suitable for maneuvering the trailers. It is an indispensable tool that allows the user to handle all these equipment inside the farm or between the different places of his operation with the same machine.
3 points apronFree quote+
LAMY LES CONSTRUCTEURSThe C3 series Greenhouse is the most compact in the range, offering perfect visibility to its user. It can take boots of all diameters, both round and rectangular up to 1,80m.Innovation: support of double diam . 35mm Snap Interchangeable on AIP Platinum (Bolt Mounting) Options: - Kit 2 straight fingers diam. 35mm-Removable lift on top Mount
Serre Balls C3 SeriesFree quote+
LAMY LES CONSTRUCTEURSNew Log Clamp adaptable to chargers from 100 to 200 HP. Made of E36 steel, it has two cylinders with hydraulic shock absorbers. The Clamp has mechanical stops in opening and closing. Ideal for intensive work, it will meet your expectations !!
LAMY LES CONSTRUCTEURSThe chassis of this MTI handler is made with square tube. The 3 fingers are 35 mm in diameter for a length of 800 mm, the working width is between 1.20 m and 2 m.OPTION: GWK claw: standard frame width 1.50m and height 0.80m, hook on plate.Finger kit with diameters 70mm lg 1040mm.
Picker MTIFree quote+
LAMY LES CONSTRUCTEURSThe Claw-Wood is adaptable on Apron Forks, the clamps are made of sheet of thickness 15mm, the opening of the clamp can go up to 2.24m this one is modulable thanks to 3-position adjusting pins. The Claw is suitable for wearing logs, logs and logs. The assembly is done on FEM apron.
Wood clawFree quote+
LAMY LES CONSTRUCTEURSThis product is ideal for bulk material recovery and Big Bag packaging. A conical shaped bucket takes all kinds of products; At its base, a cylindrical or rectangular hydraulic hatch allows to direct the product flows in the Big-Bag of your choice. Available from 1.10m up to 1.60m for capacities between 450 and 1000L .OPTIONS: - Counter Bolt Blade - Round Output Adapter Kit
Big Bag Filler BucketFree quote+
LAMY LES CONSTRUCTEURSDirect evolution of the R2 Multifunction Body (BMF.R2). The FMF.2 is available from 1.80m to 2.45m, it is equipped with diam.45 fingers total length 1040mm with two rear cylinders. Available in grapple welded teeth (GRL) and disinfecting jaw (MRK). Large kinematics of the two grapples.OPTION: Bolt-on mounting (FlatLink)
Multifunction Fork Series 2Free quote+
LAMY LES CONSTRUCTEURSWidth: from 0,90m to 1,60mGrappin flat teeth or electrically curved bent fingers1 or 2 double acting cylinders according to width and use.
W Series Hydro-Claw ForkFree quote+
LAMY LES CONSTRUCTEURSThe "W" Multifunction Body is available in different widths: from 0,90m to 1,60m. The Grapple can be designed with flat teeth or bent electroforated fingers. 1 or 2 double-effect cylinders are available on this tipper.OPTION: Bolt-on Contra-Blade
W Series Multifunctional TipperFree quote+
LAMY LES CONSTRUCTEURSThe R2 Series Multifunction Body is equipped with cylinders on the back of the bucket. The jaw has a great kinematics. It is available from 1.80m to 2.45m. The depth and height of the bucket are more suitable for telescopic 100 to 150 HP!
R2 Multifunctional TipperFree quote+
LAMY LES CONSTRUCTEURSBucket built with rigid fold on top and at its base and boxed by a flat 150x10 across the width.The opening of the jaw is adjustable.2 double-effect jacks are mounted on the dumpster.The Grapple can -Playable with dismountable flanged teeth. Available from 1,70m to 2,60m.OPTIONS: - Blade Bolt 150x20-Removable cheeks-Bolt-on or weld-on teeth. (Mounting bolted)
Multifunctional Tipper R SeriesFree quote+
LAMY LES CONSTRUCTEURSModel Special Loader: for machines from 80 to 120 CVDIs available in several widths: from 1,50m to 2,30mSteel steel S355 thickness 6 (high elasticity steel) Total opening and closing without adjustable hand system2 double-acting cylinders 40x70 eaf 425mm Stroke : 210mmSteamed arch 28mm length 550mm or Welded teeth grab (New)
A2 Multifunctional TipperFree quote+
LAMY LES CONSTRUCTEURSThe "A" Series Multifunction Body is available in different widths: from 1.85m to 2.45m. Its bottom is slightly curved and has a rigid fold over the width.The Grapple is adjustable in 2 positions with 2 double-effect cylinders 70x40mm. The Grapple is available with oxycut teeth. The jaw is available in electro-forged fingers.OPTIONS: -Bolt-on Bolt-Bolted Cheeks
Grade A Multifunction BodyFree quote+
LAMY LES CONSTRUCTEURSAvailable in widths from 1,50m to 2,50m.Body built on a high resistance structure in round steel irons of 25mm diameter, spaced 60mm.Spacing 45 mm for round irons with diameter 25 mm.Spacing 85 mm for Irons round diameter 30 mm.Lame in 250x30mm.OPTIONS : Counter-Blade Bolted 250x30mm / Teeth with blade in 150x20mm
Claire-Voie DumpsterFree quote+
LAMY LES CONSTRUCTEURSLarge capacity bucket reinforced by a central rib and an outer bottom belt. Possibility of handling bulk density. Choice of cheek patterns; Straight or raised rounded cheeks; Reinforced boosters increase capacity but are not included in the capacity. Bucket equipped with counter-blade bolted 150x20mm. Diversified range with widths between 2.00m and 5.00m and volumes from 500L to 6000L.OPTIONS: Rounded raised cheeksSteel protection ringsRemovable bolted counter-blade